|
Make sure you have read and understood the below before proceeding with the update.
* This updater can be used only to update PaintMan HD Version 6.0.3 or later. Never use this file with products or versions other than the aforementioned.
download 3.23MB 2007-07-18
■Updating Method
[PaintManHD6xx_613E.exe] updates the [PaintMan HD Version 6.0.3E - 6.1.2E] application to [PaintMan HD Version 6.1.3E].
1. Quit all running applications.
2. Expand the downloaded file to create two files, [PaintManHD6xx_613E.exe] and [Readme.txt].
3. Double-click on the [PaintManHD6xx_613E.exe] file, then follow the updater instructions.
This file can be redistributed. When redistributing, use the compressed file.
Caution!
Although the application will be updated to Ver. 6.1.3E, the [Desktop Shortcut], [Show as Menu Item in Start Menu], and [Application Name for Uninstall] created by the installer will be the same as before.
While the display of the previous items will not affect the functions, it will be possible to manually change the [Show as Menu Item in Start Menu] and [Desktop Shortcut] items. Please change the items yourself if you find them confusing.
This is the end of the updating procedure.
■Release Notes
Changes introduced in PaintMan HD Version 6.1.3E are as follows.
New Features/Bug Fixes in Version 6.1.3
■Bug Fixes
•The bug, which could cause a cel to be closed without saving the image when closing the cel immediately after drawing work on the [Cel] window, has been fixed.
•The bug, which could prevent the color of some rectangle from being replaced during the "Color Replace" operation, has been fixed.
■File Plug-in Problem Correction Points
•The bug, which caused displacements resulted from discarded resolutions during PNG, BMP file loading, has been fixed.
•The bug, which could cause an image to be partly damaged when loading some TGA file, has been fixed.
New Features/Bug Fixes in Version 6.1.2
■Function Addition and Change Points
•If the Enter key is pressed when an input field in the [X-sheet] window is blank, the operation will now treat this as an entry of "0".
•It is now possible to change the drawing paper while editing the basic information in the [File Browser] window.
•It is now possible to use the image tab of the [File Browser] window to move the view position of the cel layer in the drawing scene folder.
•Using the image tab of the [File Browser] window, cel numbers are now also shown in parts without cels.
•In the Command Menu of the [File Browser] window, [Cel Folder] has been changed to [Cel Layer].
•The frame size and margin available size are now shown in the [Cel] window title bar.
•The settings dialog box operating in the [Cel] window is shown in the position where it was opened previously.
•A [Color Chart] palette has been added, and color chart files can be shown in the palette.
•While [Caps Lock] is selected, it is now possible to carry out editing in the [Color Locator] palette.
•An [Auto Scroll During Editing] option has been added to the [Color Locator] palette.
•A [Show Coordinate Values] option has been added to the [Color Locator] palette.
•The layer and cel number is now shown in the [Light Table] palette items.
•When an image is added to the [Light Table] palette, it is now added at the very top.
•When deleting a light table in the [Light Table] palette, the light table settings status is now maintained.
•The displayed parts as [Edit Image] have been deleted, and the edit image item display mode has been changed.
•A [Delete All] button has been added to the [Light Table] palette.
•A [Swap Image] button has been added to the [Light Table] palette.
•A [Light Table] tool button has been added to the [Light Table] palette.
•A [Show Background Color] button has been added to the [Light Table] palette.
•In the [Light Table] palette, the [Fill] tool [Refer to Light Table Boundary Line] can now be switched to.
•Using the [Layer] palette [Convert] command, a number of selected planes can now be converted into 1 plane.
•Using the [Layer] palette [Convert] command, the number of target layers that can be converted has been increased.
•In the [Batch] palette [Unsharp Mask], [Gaussian Blur], [Brightness and Contrast], [Tone Curve], [Level Adjust], [Hue and Saturation], [Color Balance] and [Dust Filter], the value set from the [Filter] menu can now be used.
•In the [Batch] palette [Gaussian Blur], the set values will be maintained.
•In the [Batch] palette [Unsharp Mask], the set values will be maintained.
•The maximum number of batch items that can be deleted simultaneously using [Delete Items] in the [Batch] palette has been increased from 10 to 100.
•A [Move Using Cel Number] function has been added to the [Sub] palette.
•After executing the [Show All] or [Hide All] commands in the [Light Table] menu, executing the same command again now returns to the original display.
•The [Light Table] menu [Show All] and [Hide All] shortcuts have been swapped.
•A [Delete All] command has been added to the [Light Table] menu.
•A [Show Only Outline] command has been added to the [Light Table] menu.
•A [Reset Position] command has been added to the [Light Table] menu.
•A [Show Only Center Line] mode switching command has been added to the [View] menu.
•When using the [Line] and [Curve] tools, the display before and after determination has been made the same.
•[Shape Selection], [Internal Selection], and [Format Selection] options have been added to the [Rectangle Selection], [Lasso], and [Selection Brush] tools.
•When using the [Fill] tool, pressing the F1 key will now switch to the [Close Gap] option.
•When using the [Brush] tool, pressing the F1 key will now switch to the [Paint Only With Clicked Pixel Color] option.
•In the [Gradient Tool], if the Shift key is pressed when drawing an ellipse, it will become a circle.
•In the [Gradient Tool], [Over-paint] and [Dithering] options have been added.
•A [Include Selection With Drag] option has been added to the [Extender] tool.
•A [Show Guide] option has been added to the [Light Table] tool.
•It is now possible to create an X-sheet at the same time when creating a new scene folder.
•It is now possible to confirm the specified drawing paper margin when creating a new scene folder.
•When creating a new scene folder, it is now only possible to change the size when the drawing paper is set to custom drawing paper.
•A [Combine White Background] option has been added to the image save and export dialog boxes.
•A [Set Selection as White Transparent on Paste] option has been added to [Cel] in the [Preferences] dialog box.
•When exporting a scene folder, the CoreRETAS X-sheet standard resolution will be taken from the scene folder settings.
•For layers and planes, [Integration of Same Types] of items can now be carried out.
•When copying a [Mono Paint] layer or when moving a selection in the floating condition, it is now shown in the correct layered order in each plane.
•The view mode when vector images have been loaded to the light table now follows [Show Antialias] in the [Show] menu.
•When carrying out simple position adjustment using the light table [Set Position] dialog box, the position now conforms with the anchor frame.
•The semi-transparent parts of thumbnails are now shown faintly.
•The [Raster General Layer] has been moved to the bottom of the layer selection list of each dialog box.
•Image loading and display has been speeded up.
•The light table display has been speeded up.
•The [Color Locator] palette view has been speeded up.
•When an image is exported as raster after editing as a vector, the image quality has been improved.
•When the display size is set to small, the image quality while executing motion check has been improved.
•An [Undo/Redo] command has been added to the [Edit] menu.
•In the [Image Previewer] of the [File Browser] window, when creating cels the dialog box now allows specification of the number of cels.
•A [Scroll to Outside of Image] option has been added to [Cel] in the [Preferences] dialog box.
•An [Also Copy Outline Plane When Copying Painting Plane] item has been added to [Cel] in the [Preferences] dialog box.
•In the [Edit] menu, the [Undo] command has been changed to [Return 1 Step], and the [Redo] command has been changed to [Proceed 1 Step].
•In the X-sheet, even if an inbetweening mark comes before the first cel number, when the [Transfer Inbetweening Numbers] command is executed, the inbetweening marks will now be transferred.
•When creating a cel using the [Image Previewer] in the [File Browser] window, if there is not enough space in the cel bank, the space is now increased.
•While moving the light table using the [Move Light Table] tool, the image is now displayed.
•A [Make Overlapping Image Transparent] option has been added to the [Light Table Setting] dialog box.
•When opening the [Cel] window, [Default] is set in the [Light Table] palette.
•In the [Color Locator] palette, when the background color is set to ON, the background color is also shown.
•In the [Eyedropper] tool, clicking on a transparent part now acquires the transparent color.
•The lower limit of the [Gap] parameter in the [Fill] tool, [Magic Wand] tool, and the [Join Line] tool has been changed from 0 pixels to 1 pixel (when mm is specified, the change is from 0.0 to 0.1mm).
•When opening the X-sheet, in the save dialog box [X-sheet] has been changed to [Drawing X-sheet] and [CoreRETAS X-sheet] has been changed to [Shooting X-sheet].
■Bug Fixes
•The bug in which the application was forcibly quit when pressing the ESC key to cancel while loading TGA and PND files has been fixed.
•The bug in which the application was forcibly quit by pressing the Ctrl key during start-up when the [Fill] tool was the current tool has been fixed.
•The bug of the slower playback than the specified FPS when executing motion check has been fixed.
•The bug in which the editing condition was sometimes not released when using the [Airbrush Effect] tool in the vector paint layer has been fixed.
•The bug in which the anchor frame created a 0*0 scene folder when the drawing paper unit was set to pixels using [Drawing Paper] in [Preferences] has been fixed.
•The bug where rotation to the correct direction when carrying out rotation distortion while the cel was shown inversed has been fixed.
•The bug in which the anchor frame position was displaced when viewing an image moved from the [Frame] layer in the light table has been fixed.
•The bug in which the semi-transparent parts of light table images were not correctly shown has been fixed.
•The bug where resolution setting could not be carried out in the light table [Set Position] dialog box has been fixed.
•The bug that sometimes caused unstable operation after executing the [Paste to Selected Plane] command for the vector plane has been fixed.
•The bug where the [Layer] palette scroll bar was sometimes not correctly refreshed has been fixed.
•The bug that prevented the input of a number immediately before an inbetweening mark after an inbetweening mark in the X-sheet has been fixed.
•The bug that prevented correct operation of the light table simple position adjustment when the anchor frame cel size was changed to an empty value has been fixed.
•The bug when using the Ctrl or Shift keys in the [Light Table] palette where an incorrect selection condition could be set has been fixed.
•The bug where the [Pen] tool sometimes did not operate immediately after opening a file has been fixed.
•The bug in which the background color was not rendered in some parts when using the [Color Locater] palette has been fixed.
•The bug in which the cel size was sometimes not correctly shown in the [Batch] palette [Image Resolution] has been fixed.
•The bug where the alpha editing view was not correctly shown in the [Raster Plane] of the vector layer has been fixed.
•The problem of the incorrect ruler mouse position when the [Cel] window tool bar was being displayed has been fixed.
•The bug in which the X direction ruler did not operate correctly after switching between showing/hiding the [Cel] window tool bar has been fixed.
•The bug in which the [Cel] window [Zoom Out] button could be pressed but did not operate has been fixed.
•The bug in which the red border of the Light Table was not displayed when the [Light Table Move] tool was selected while the [Cel] window was open has been fixed.
•The bug in which correct transfer could not be realized when executing the [Transfer Inbetween Numbers] command when different cel numbers were input for each 1 frame of the X-sheet has been fixed.
•The bug in which correct transfer could not be realized when executing the [Transfer Inbetween Numbers] command when a value of 1024 or larger was input as the cel number in the X-sheet has been fixed.
•The bug of not being able to input 0 as an X-sheet inbetween number has been fixed.
•The bug where the cel number did not change even when a value was input into the X-sheet has been fixed.
•The bug in which input could not be carried out for all frames when several frames were selected and an empty cel was input in the X-sheet has been fixed.
•The bug where the application was forcibly quit by moving an image other than a [Gray Trace] image to a [Gray Trace] image in the [File Previewer] palette has been fixed.
•The bug in which the minimum width of the [Layer] palette was not the same as the minimum width of the [Light Table] palette has been fixed.
•The bug when the OS was Windows 2000 in which the characters are not shown on the status bar of the [Light Table] palette has been fixed.
•The bug in which the [Sub] palette did not scroll even when the zoom-in rate was changed in the cel when the [Sub] palette scroll was linked to the cel has been fixed.
•The bug where the color was not painted onto white and transparent parts by the [Brush] tool when the check box of the [Only Paint the Color of the Clicked Pixel] was On has been fixed.
•The bug in which the extended width in the [Extend Selected Range] and [Reduce Selected Range] dialog boxes could be set to 0 has been fixed.
•The bug where the selected condition of a vector was released when executing the [Return 1 Step] after deleting a vector line has been fixed.
•The bug in which the loading of a vanishing point file could not be carried out when creating a [Vanishing Point Layer] has been fixed.
•The bug in which semi-transparent pixels were rendered as opaque during motion check execution has been fixed.
•The bug where the movement of the mouse cursor immediately after clicking the mouse caused the cursor to be dragged momentarily has been fixed.
•The bug that caused rotation of the view image when the [Light Table] view position was moved has been fixed.
•The bug that prevented correct previewing when the image resolution was switched to numerical setting in the [Light Table View Setting] dialog box has been fixed.
•The bug in which the settings were not reflected when moving selected regions using key operations immediately after switching the [Move Image] check box of the [Rectangle Selection] tool, [Lasso] tool, [Magic Wand Selection] tool and [Selection Brush] tool has been fixed.
•The bug where there was sometimes a change to a size other than set size when executing [Image Size] in the [Batch] Palette has been fixed.
•The bug where the units specified in [Image Size] in the [Batch] Palette were not used in the [Change Image Size] dialog box has been fixed.
•The bug in which the selected range began to flash when pressing the [Alt/Option] keys to switch to [Polyline] while [Lasso] was selected in the [Lasso] tool has been fixed.
•The bug in which a strange shape was drawn when carrying out drawing using the [Shape] tool during alpha editing where part of the shape lay outside the drawing paper has been fixed.
•The bug where the hand tool was switched to when pressing the [Ctrl/Command] keys during operations using the [Polyline] tool has been fixed.
•The bug in which pressing the [Alt/Option] key did not change to [Lasso] when starting to select a range while pressing the [Alt/Option] keys in the [Lasso] Tool [Polyline] has been fixed.
•The bug where processing became impossible in a situation where there were many lines pointing in the same direction piled on top of each other using the [Polyline] tool has been fixed.
•The bug that made it sometimes not possible to finish when using the [Polyline] tool to finish on the same point as the starting point has been fixed.
•The bug in which part of a shape sometimes remained on the screen when executing the [Undo] comment after drawing an acute angled shape using the [Shape] tool has been fixed.
•The bug in which the folder name was not refreshed even when the [Auto Create] check box was On while selecting the work name from the history using the cel scene folder has been fixed.
■File Plug-in Function Adding and Changing Points
•A 16-bit Save option has been added to the [PNG] file plug-in.
•The [RAW] file plug-in is now capable of saving 16-bit images.
■File Plug-in Problem Correction Points
•The bug where transparent parts became white when reading SVD files has been fixed.
•The bug in which images were inversed when loading 8-bit grayscale PNG has been fixed.
•The bug in which thumbnails were black when loading 8-bit grayscale PNG has been fixed.
•The problem where the colors were strange when saving in non-compressed SGI format has been fixed.
|
