|
Make sure you have read and understood the below before proceeding with the update.
* This updater can be used only to update STYLOS HD Version 2.0.3 or later. Never use this file with products or versions other than the aforementioned.
download 4.01MB 2010-02-25
■Updating Method
[STYLOSHD2xx_254E.exe] updates the [STYLOS HD Version 2.0.3E - 2.1.3E] application to [STYLOS HD Version 2.5.4E].
1. Quit all running applications.
2. Expand the downloaded file to create two files, [STYLOSHD2xx_254E.exe] and [Readme.txt].
3. Double-click on the [STYLOSHD2xx_254E.exe] file, then follow the updater instructions.
This file can be redistributed. When redistributing, use the compressed file.
Caution!
Although the application will be updated to Ver. 2.5.4E, the [Desktop Shortcut], [Show as Menu Item in Start Menu], and [Application Name for Uninstall] created by the installer will be the same as before.
While the display of the previous items will not affect the functions, it will be possible to manually change the [Show as Menu Item in Start Menu] and [Desktop Shortcut] items. Please change the items yourself if you find them confusing.
This is the end of the updating procedure.
■Release Notes
Changes introduced in STYLOS HD Version 2.5.4E are as follows.
New Features/Bug Fixes in Version 2.5.4
■Function Addition and Change Points
• The file loading and saving operation speeds have been improved.
• A [Scroll in Each Key and Inbetween Layer] option has been added to the [X-sheet] category in [Preferences]. The scroll operation is switched using [Drawing X-sheet].
• A [Use Space Key in Hand Mode Switching] option has been added to [Cel] in [Preferences].
• A [Use Tablet in Mouse Mode] option has been added to [Cel] in [Preferences].
• A [Create Plane when Pasting to Different Cel] option has been added to [Cel] in [Preferences].
• It has been made possible to set the compression ratio of dedicated file formats using [File] in [Preferences].
• An [Auto Input Cel Number] command has been added to the [X-sheet] menu.
• The [Title/Episodes/Sequences/Scenes/Number of Frames] are now shown in the [Drawing X-sheet].
• The [Switch View Column], [X-sheet Settings], [Motion Check Settings], [Transfer Inbetween Numbers], [Layer], and [Frame] buttons have been added to [Drawing X-sheet].
• When implementing [Save As] for a [Drawing X-sheet], it has been made possible to save the sheet in CSV format.
• When implementing [Save As] for a [Drawing X-sheet], the folder of the original file has been arranged to be shown in the saving dialog box.
• A [Print using 3-second Sheet] option has been added to the [Print Settings] dialog box of [Drawing X-sheet].
• A [Print All Borders] option has been added to the [Print Settings] dialog box of [Drawing X-sheet].
• A [Show using Large Font] option has been added to the [Direction Settings] dialog box. When this is set to ON, the direction in the [Drawing X-sheet] will be shown using a large font.
• A [Link with Direction Symbol] option has been added to the [Insert Frame] dialog box of the [X-sheet] menu. When this is set to ON, the direction symbol will move linked with the frame insertion.
• A [Link with Direction Symbol] option has been added to the [Delete Frame] dialog box of the [X-sheet] menu. When this is set to ON, the direction symbol will move linked with the frame deletion.
• An [Include BG] option has been added to the [New X-sheet] dialog box. When this is set to ON, the X-sheet will be created including the [BG] layer.
• An [Include BG] option has been added to the [New Scene Folder] dialog box. When this is set to ON, the scene folder will be created including the [BG] layer.
• The layout of the [Page Setup] dialog box of the [Cel] menu has been changed, and a preview has been added.
• A [Create Backup File] option has been added to the [Page Setup] dialog box of the [Cel] menu. When this is set to ON, the image before changes are made will be copied to the backup folder.
• The [Light Table] palette has been arranged so that when an item is dropped on to the [Delete] button, the item will be deleted.
• In the [File Browser] window, images that include a [Shadow Markup Layer] will have an icon shown in the cel number view column.
• A [Show Entire Cel] option has been added to the [Motion Check Settings] dialog box of the [View] menu. When this is set to ON, the motion check will be applied using a size that shows the whole of the cel that is to be checked.
• In the [File Browser] window, the numbers for cels in which keys and inbetweens have been input to the same frame of the [Drawing X-sheet] have been arranged to be shown in a style similar to [(1)].
• A [Link Layer Scroll] option has been added to the [Browser Settings] dialog box of the [File Browser] window. When this is set to ON, the layer horizontal scroll will be linked.
• When applying the [Copy Set] command of the [Light Table] menu, the set after the copying has been arranged so that it will be automatically switched to.
• The layout of the [Tool Options] palettes of part of the tools has been changed.
• When applying [Previous Cel] or [Next Cel] of the [Cel] menu, the cel window has been arranged to refresh.
• The operation of the [Join Line] tool has been improved.
• When closing gaps using the [Fill] and [Magic Wand] tools, improvements have been made so that narrow parts are not judged to be gaps.
• In the [Pen], [Line], [Curve], [Polyline], and [Shape] tools, it has been made possible to specify the line width to 0.01mm.
• When using the [Light Table] tool, the operation in which the center point was moved when the Space key was pressed has been changed to an operation where the center point is moved by clicking the mouse while pressing the Space key.
• When the selection has been moved outside the cel, the form of the selection has been arranged so that it will be maintained.
• When applying paste, if the pasting position is mistakenly selected outside the cel, the pasting position has been arranged so that it is adjusted to the top left.
• In the case where paste is applied after carrying out copy or cut, the selection size has been arranged so that it will not affect the size of the new cel.
• A [Copy Set] command has been added to the [Light Table] menu.
• An [Open] command has been added to the [Light Table] menu.
• The [Default] light table set has been arranged so that one set is present in each cel window.
• When a cel has been opened, the [Default] light table set has been arranged so that it will normally be associated.
• While a cel is open, the [None] light table set has been arranged so that it will not be shown.
• In the [Batch] palette, the current settings have been arranged to be shown in the [Input] and [Output] items.
• By double clicking on the batch item name in the [Batch] palette, it has been made possible to open the settings dialog box.
• During Apply All in batch processing, unnecessary palettes have been arranged so that they will be temporarily hidden.
• The printing layout of the [Drawing X-sheet] has been improved.
• During sound playback of the [Drawing X-sheet], in the case where the selection is one frame, the playback has been arranged so that it will play to the end.
• An [Open New Window] command has been added to the command menu of the [File Browser] window.
• The [Change Cel Number] command of the [File Browser] window has been arranged so that it will operate for multiple cels that are currently being selected.
• When [Fix Scale Height To Width Ratio] is set to ON in [Scaling] of the [Transform] dialog box, the height to width ratio in the [Cel] window has been arranged to remain fixed even during mouse operation.
• When [Center Line Check View] is set to ON, it has been made possible to delete the check display by pressing the Escape key.
• When [View Center Line] is set to ON, the center line has been arranged to only be displayed within the range of the cel.
• A [Show Entire Cel] option has been added to the [Motion Check Settings] dialog box of the X-sheet.
• It has been made possible to change the [Margin Color] in the [Motion Check Settings] dialog box.
• When applying [Quick Motion] using keyboard input, it has been made possible to switch to [Previous] using the [1] key, and to [Next] using the [2] key.
• It has been made possible to show a preview using the [Export Painting] dialog box.
• The operation when [Close Gap] of the [Fill] tool is set to ON has been improved.
• When a cel is newly created in the same layer as the document that has been opened as the current window in the [File Previewer] palette, it has been arranged that a new window will not open.
• A [Reload Scene Folder] button has been added to the [File Browser] window and the [File Previewer] palette.
• When viewing the scene folder in the [File Browser] window, images that are currently being edited and images that are currently loaded in the light table will have color applied to their cel number parts.
• In the case where a folder inside the scene folder has been deleted using the [File Browser] window, the image view area has been arranged so that it will be refreshed.
• [Show/Hide Layer] has been added to the batch items in the [Batch] palette.
• A [Direct Processing] option has been added to the [Pen] tool options. In the case when drawing to a raster plane, direct drawing will be carried out without using provisional lines.
• In the tool options of the [Eyedropper] tool, [Top Plane Color] has been arranged at the top of the list. (This option should normally be used.)
• When carrying out exporting, in the case where the [Shadow Markup] layer of the output layer is selected, the layer has been arranged so that it will be output even if it has been set to hide.
• When carrying out exporting, in the case where the [Drawing] layer of the output layer is selected, the layer has been arranged so that it will be output even if it has been set to hide.
• It has been made possible to create a one-layer X-sheet.
• By rotating the mouse wheel while pressing the Ctrl key, it has been made possible to carry out horizontal scrolling.
• When saving in formats such as PNG, the option settings for each file format are arranged to be memorized even after quitting the application.
• The [Border Line] plane of the [Shadow Markup] layer has been arranged so that it can only be edited using the [Refresh Shadow Markup] command.
• In the case where images with formats in which the resolution is not saved are loaded into the light table, the resolution has been arranged to be set as the value that was set in [Raster Image Loading Resolution].
• The position of a layer inserted in the X-sheet has been set to be the same as the position of the cel layer that is created at the same time.
• When edited images are selected using the [Light Table] palette, it has been made possible to move the edited images and to adjust the displayed positions using the [Light Table] tool.
• In the [Light Table View Settings] dialog box, it has been made possible to specify the position in 0.01cm units.
• The light table simple position adjusting function has been arranged to determine the position that anchors the anchor frame.
• An [Include Original Image when Switching Images using Alt+Number] option has been added to the [Light Table Settings] dialog box of the light table.
• It has been made possible to change the resolution of images loaded to the light table between 20dpi and 1440dpi.
• In the [Shortcut Settings] dialog box, it has been made possible to set shortcuts to the tool option items.
• In the situation where [Motion Check] playback is in the stopped condition, it has been made possible to start the playback by pressing keys 1-7.
• A [Show Shadow Markup Layer] option has been added to the [Motion Check Settings] dialog box.
• It has been made possible to edit the history of items that input the title and person in charge.
■Bug Fixes
• The bug in which drawing sometimes became impossible when the pen pressure was made lower while drawing using a tablet has been fixed.
• The bug in which undo became impossible even when implementation was cancelled using the [Page Setup] dialog box of the [Cel] menu has been fixed.
• The bug in which the layer opacity was not saved when cels including the [Vanishing Point Layer] were saved has been fixed.
• The bug in which the vanishing point view was not linked to the transparency in the case where images including the [Vanishing Point Layer] were loaded to the [Light Table] has been fixed.
• The bug in which exporting was always carried out at 24FPS when applying [Motion Check Export] in the [X-sheet] menu has been fixed.
• The bug in which the third digit below the decimal point was mistakenly set to [0] when the [Units] were set to [inch] in the [Drawing Paper] category of [Preferences] has been fixed.
• The bug in which values were sometimes not set correctly in the [Drawing Paper] category of [Preferences] has been fixed.
• The bug in which part of the [Shadow Markup] layer was sometimes not correctly exported when applying [Export Painting] has been fixed.
• The bug in which the [Output Sound] option in [Motion Check Export] did not operate has been fixed.
• The bug in which [Fix Scale Height to Width Ratio] in the [Transform] dialog box sometimes did not correctly operate has been fixed.
• The bug in which the starting point was sometimes slightly shifted when using the [Line] and [Curve] tools has been fixed.
• The bug in which the application was forcibly quit when specifying the file format as [YUV] while carrying out raster export has been fixed.
• The bug in which the application was forcibly quit while carrying out Same File Name saving of a new image when applying [Swap Image] of the [Light Table] palette has been fixed.
• The bug in which the application was sometimes forcibly quit when newly creating a scene folder in an empty folder in the [File Browser] window has been fixed.
• The bug in which the application became unable to operate normally when loading a folder with a similar name to another folder in the same folder in the [File Browser] window has been fixed.
• The bug in which the application sometimes became unable to operate normally when inputting a line return in the first line of the Edit dialog box when using the [Text] tool has been fixed.
• The bug in which the tool became unable to operate normally when confirming the specification of two points when [Spline], [Color], or [Connect Start and End Points] of the [Polyline] tool had been set to ON has been fixed.
• The bug in which the application sometimes became unable to operate normally when applying [Load Previous and Next Images] of the [Light Table] palette after deleting the cels shown in the [Previewer] palette has been fixed.
• The bug in which an error message is shown when narrowing the height of the window while showing the [Ruler] in the [Cel] window has been fixed.
• The bug in which the minimized condition becomes unable to be deleted when applying [Arrange] of the window menu while the [Tool Options] palette is in the minimized condition has been fixed.
• The bug in which it was not possible to select the edited image of the [Light Table] palette and the light table images at the same time has been fixed.
• The bug in which the [Make Overlapping Images Transparent] option was not applied to all the light table sets using the Settings dialog box of the [Light Table] palette has been fixed.
• The bug in which the [Set Image to High Quality for Zoom In, Zoom Out, and Rotation] option was not applied to all the light table sets using the Settings dialog box of the [Light Table] palette has been fixed.
• The bug in which it was not possible to hide the [Mono Paint] layer and [Gray Paint] layer using the [Switch View Layer] command of the light table has been fixed.
• The bug in which the [Frame] layer and [Vanishing Point] layer views were not immediately refreshed when using the [Switch View Layer] command of the light table has been fixed.
• The bug in which batch sets that were supposed to be undeletable could sometimes be mistakenly deleted in the [Edit Batch Set] dialog box of the [Batch] palette has been fixed.
• The bug in which the operation of the mouse wheel would sometimes mistakenly change the settings of [Input] and [Output] when displaying items other than the [Input] and [Output] items in the [Batch] palette has been fixed.
• The bug in which the position that was last selected was not shown when opening the Select File/Select Folder dialog box using [Input] of the [Batch] palette has been fixed.
• The bug in which the file format options dialog box sometimes did not normally open in [Output] of the [Batch] palette has been fixed.
• The bug in which the scene folder could not be created while the [Drawing Paper] was set to Custom when creating a new scene folder has been fixed.
• The bug in which the number of frames calculation in [Seconds + Frames] or [Page and Frame Number] was sometimes not correctly carried out when pressing OK in the [New X-sheet] or [X-sheet Settings] dialog box has been fixed.
• The bug in which the check condition of items such as [Save Copy] was mistakenly switched while switching the file format in the image file saving dialog box has been fixed.
• The bug in which text was sometimes not normally exported in the case where the [Export All] option was set to OFF when carrying out exporting has been fixed.
• The bug in which images that could not be painted were sometimes exported if the image had overlapping lines when exporting vector format images using Export Painting has been fixed.
• The bug in which all the layers were not exported when there were several [Raster General] layers and [Text] layers during raster exporting has been fixed.
• The bug in which operation was not carried out while there was no selection even when the [Join Line] command was applied has been fixed.
• The bug in which the center of rotation was sometimes wrong when carrying out rotation in the [Transform] dialog box has been fixed.
• The bug in which the form was sometimes mistakenly changed when changing the [Angle] in the [Transform] dialog box has been fixed.
• The bug in which the guide line display mistakenly remained when applying [Transform] while two windows had been opened using the [New Cel Window] function has been fixed.
• The bug in which the preview and the actual results sometimes mistakenly differed when applying [Rotation] of [Transform] to the vector layer has been fixed.
• The bug in which the direction of the cursor mistakenly became the opposite while applying [Enlarge/Reduce] of [Transform] in the condition where the cel was in the flip vertical or flip horizontal view has been fixed.
• The bug in which the grid sometimes did not change to the view condition when carrying out grid setting has been fixed.
• The bug in which it sometimes mistakenly became impossible to undo drawings even when they had been drawn using tools after applying a command such as [Page Setup] or [Change Margins] that cannot be undone has been fixed.
• The bug in which scene folder playback was not carried out in the order that the scenes were displayed in the scene folder when applying [Motion Check] has been fixed.
• The bug in which the layer operation was mistakenly carried out in the [Layer] palette when [Center Line Check View] was set to ON has been fixed.
• The bug in which the position was sometimes not matched when applying the [Match View Size and Position] command of the [Window] menu has been fixed.
• The bug in which resetting was not correctly carried out when applying the [Reset Position] command of the [Window] menu while the [Tool Options] palette was in the minimized condition has been fixed.
• The bug in which the [Dust Filter] filter did not operate correctly with regard to the [Raster Sketch] layer has been fixed.
• The bug in which the sound that was being played did not stop when the [X-sheet] window was closed has been fixed.
• The bug in which the vector data was sometimes destroyed while editing the vector layer has been fixed.
• The bug in which the line form was sometimes changed when line joining was carried out in the [Vector Drawing] layer has been fixed.
• The bug in which the line was not shown even while switching the viewing condition when pasting had been carried out in a hidden vector plane has been fixed.
• The bug in which lines were not joined even when [Join Line] was set to ON while creating a [Shadow Markup] layer has been fixed.
• The bug in which the foreground color was mistakenly changed to black after the properties had been opened in the [Selection] plane of the [Selection] layer has been fixed.
• The bug in which filling was sometimes not possible in the [Selection] layer has been fixed.
• The bug in which the drawing area was mistakenly filled when pasting an image that had an area drawn with white in a white transparent layer has been fixed.
• The bug in which a pixel with an RGB value shifted by 1 sometimes occurred when drawing using a semitransparent color has been fixed.
• The bug in part of the tools in which the provisional lines during drawing were shifted from the lines that were actually drawn has been fixed.
• The bug in which the option settings of the [Zoom] tool were mistakenly reset when the application was started up has been fixed.
• The bug in which the option settings of the [Light Table] tool were mistakenly reset when the application was started up has been fixed.
• The bug in which the guide lines were sometimes mistakenly cleared when using the [Light Table] tool has been fixed.
• The bug in which the color was sometimes obtained for the position one pixel shifted from the position that was clicked when the [Color on the Display] or [Light Table Color] options of the [Eyedropper] tool were set to ON has been fixed.
• The bug in which the switching order was strange when switching the tool options of the [Eyedropper] tool using shortcuts has been fixed.
• The bug in which the contents of the layer sometimes mistakenly disappeared from view when moving a [Text] layer using the [Move Layer] tool has been fixed.
• The bug in which the line spacing became mistakenly contracted when inputting a blank line in the [Raster Drawing] layer while [Draw on Selected Raster Plane] was selected using the [Text] tool has been fixed.
• The bug in which the view was not refreshed when drawing on the [Raster] plane of the vector layer using the [Text] tool has been fixed.
• The bug in which provisional lines sometimes mistakenly remained on the screen while drawing using the [Line] or [Curve] tools has been fixed.
• The bug in which provisional lines sometimes mistakenly remained on the screen when points had been cancelled by right clicking while using the [Polyline] tool has been fixed.
• The bug in which part of the provisional lines sometimes mistakenly remained on the screen after confirmation when drawing at 45 degrees using the [Polyline] tool has been fixed.
• The bug in which provisional lines mistakenly remained on the screen when the Shift key was pressed while using the [Polyline] tool as a curved line has been fixed.
• The bug in which the upper left of the line became narrower by more than 1 pixel when applying [Thinning] in the [Width Change] tool to a raster plane has been fixed.
• The bug in which part of the line sometimes remained when applying undo after implementing the [Join Line] tool when the [Joining Line Width] values were large has been fixed.
• The bug in which the thickness of parts of the line were sometimes mistakenly changed by adding changes using [Eraser] and other tools to vector lines that had been corrected using [Join Line], etc. has been fixed.
• The bug in which parts of the lines were sometimes not shown when carrying out [Join Line] for vector lines that were close to the horizontal and vertical has been fixed.
• The bug in which the parameter units in part of the tool options did not switch after switching [Use mm As Tool Unit] between ON/OFF using [Cel] in [Preferences] has been fixed.
• The bug in which the units were sometimes not set normally when carrying out loading of the drawing paper settings file using [Drawing Paper] of [Preferences] has been fixed.
• The bug in an environment where two or more monitors were being utilized in which the application window size was sometimes mistakenly adjusted in one of the monitors at startup has been fixed.
• The bug in which the application was sometimes forcibly quit or could not be operated normally when carrying out pasting to cels which had a smaller size than the original copy image has been fixed.
• The bug in which the application was sometimes forcibly quit or could not be operated normally during drawing when [Show Cursor In Actual Size] was set to OFF using [Cel] in [Preferences] has been fixed.
• The bug in which the cel was sometimes mistakenly closed without saving the image when closing the cel immediately after carrying out drawing in the [Cel] window has been fixed.
• The bug in which the [Join Line] tool did not operate for raster images has been fixed.
• The bug in which drawing became unable to be normally carried out when utilizing selection to carry out drawing while drawing with vectors has been fixed.
• The bug in which drawing sometimes became unable to be correctly carried out in the [Vector Drawing] layer or [Vector Correction] layer has been fixed.
• The bug in which drawing was not possible in the floating condition after applying [Paste] has been fixed.
• The bug in which colors were mistakenly acquired as semitransparent colors when using the eyedropper in the [Outline] plane of the [Gray Paint] layer has been fixed.
• The bug in which Zoom In could not be carried out normally in the case where transform was applied in the condition where the whole of the image had been selected has been fixed.
• The bug in which part of the image was sometimes missing or the position was shifted during confirmation in the case where the selection was moved outside the image while applying transform has been fixed.
• The bug in which images were sometimes mistakenly inverted after moving the control point while applying image transforming has been fixed.
• The bug in which keys that had been set as menu shortcuts could not be used during text input even in cases where the shortcuts could not be applied has been fixed.
• The bug in which black bands sometimes appeared on images that were being played back when the [Show Selection Only] option of [Motion Check] had been set to ON has been fixed.
• The bug in which operation according to the settings was sometimes not realized after switching ON/OFF the [Show Light Table] option of [Motion Check] has been fixed.
• The bug in which the display of the cursor mistakenly remained on the screen when the cel was moved in the case where [Show Cursor In Actual Size] in [Preferences] had been set to ON has been fixed.
• The bug in which the contents of the windows that were not currently active were not refreshed even when moving the image inside the selection while the same image was being shown on several windows has been fixed.
• The bug in which the contents of the windows that were not currently active were not refreshed when applying cut or paste while the same image was being shown on several windows has been fixed.
• The bug in which [0] was mistakenly input when Enter was pressed in the condition where the input column was a blank column while the dialogue column of the [X-sheet] window was being selected has been fixed.
• The bug in which saving was not carried out when closing an X-sheet after opening it and changing only the sheet settings or direction has been fixed.
• The bug in which unnecessary drawing was sometimes carried out at the end of the column when using the X-sheet pencil tool has been fixed.
• The bug in which the display was changed when opening an X-sheet that had been saved in the situation where [Direction] had been closed has been fixed.
• The bug in which the view of the plane was sometimes not refreshed even when the layer was selected using the [Layer] palette has been fixed.
• The bug in which [Sequential Cels in the Front] became unable to be used in [Input] of the [Batch] palette has been fixed.
• The bug in which the batch item was sometimes not moved to the correct position when moving batch items in the [Batch] palette by dragging has been fixed.
• The bug in which the correct values were not saved after restarting the application when the values were set in units other than pixels in [Change Margins] of the [Batch] palette has been fixed.
• The bug in which the [Composite White Background] option did not correctly operate when saving cels that each have one layer and plane has been fixed.
• The bug in which the [Shooting Frame] or [Anchor Frame] was sometimes shown in a shifted position has been fixed.
• The bug in which batch processing did not operate for the cel in the case where the [File Browser] window was active has been fixed.
• The bug in which the cursors of the [File Browser] window and the [File Previewer] palette were not synchronized has been fixed.
• The bug in which abnormal values were sometimes shown in the image size view of the [File Previewer] palette has been fixed.
• The bug in which the [Next Cel] or [Previous Cel] commands sometimes did not operate in the condition where the [Cel] window was open has been fixed.
• The bug in which rotation was not carried out using the correct center position when rotating a light table image that had been inverted using the [Light Table] tool has been fixed.
• The bug in which a position shifted from the selection was sometimes cleared when clearing the image inside the selection after using the [Move] tool has been fixed.
• The bug in which the scrolling position was sometimes not refreshed when numbers of layers and planes remained in the [Layer] palette has been fixed.
■File Plug-in Function Adding and Changing Points
• Depth of color has been added to the TGA export settings.
■File Plug-in Problem Correction Points
• The bug in the Intel Mac environment in which PICT files could not be loaded with the correct resolution during loading has been fixed.
■Release Notes
Changes introduced in STYLOS HD Version 2.1.3E are as follows.
New Features/Bug Fixes in Version 2.1.3
■Bug Fixes
• The bug, which could cause a cel to be closed without saving the image when closing the cel immediately after drawing work on the [Cel] window, has been fixed.
■File Plug-in Problem Correction Points
• The bug, which caused displacements resulted from discarded resolutions during PNG, BMP file loading, has been fixed.
• The bug, which could cause an image to be partly damaged when loading some TGA file, has been fixed.
New Features/Bug Fixes in Version 2.1.2
■Function Addition and Change Points
• If the Enter key is pressed when an input field in the [X-sheet] window is blank, the operation will now treat this as an entry of "0".
• A Context Menu has been added in the [X-sheet] window.
• It is now possible to change the drawing paper while editing the basic information in the [File Browser] window.
• It is now possible to use the image tab of the [File Browser] window to move the view position of the cel layer in the drawing scene folder.
• Using the image tab of the [File Browser] window, cel numbers are now also shown in parts without cels.
• In the Command Menu of the [File Browser] window, [Cel Folder] has been changed to [Cel Layer].
• The editing image layer and cel number are now shown in the [Cel] window title bar.
• The frame size and margin available size are now shown in the [Cel] window title bar.
• The settings dialog box operating in the [Cel] window is shown in the position where it was opened previously.
• The [Previewer] palette has been discontinued, and a [File Previewer] palette has been added.
• A [Switch Drawing Mode] button has been added to the [Tool] palette.
• A [Shadow Markup Refresh] button has been added to the [Tool] palette.
• A [Change Plane] button has been added to the [Tool] palette.
• A [Command Menu] button has been added to the [Tool] palette.
• The layer and cel number is now shown in the [Light Table] palette items.
• When an image is added to the [Light Table] palette, it is now added at the very top.
• When deleting a light table in the [Light Table] palette, the light table settings status is now maintained.
• The displayed parts as [Edit Image] have been deleted, and the edit image item display mode has been changed.
• A [Delete All] button has been added to the [Light Table] palette.
• A [Swap Image] button has been added to the [Light Table] palette.
• A [Light Table] tool button has been added to the [Light Table] palette.
• Using the [Layer] palette [Convert] command, a number of selected planes can now be converted into 1 plane.
• Using the [Layer] palette [Convert] command, the number of target layers that can be converted has been increased.
• In the [Batch] palette [Dust Filter], the value set from the [Filter] menu can now be used.
• After executing the [Show All] or [Hide All] commands in the [Light Table] menu, executing the same command again now returns to the original display.
• The [Light Table] menu [Show All] and [Hide All] shortcuts have been swapped.
• A [Delete All] command has been added to the [Light Table] menu.
• [Reset Position] and [Position, Scale, and Rotation Reset] commands have been added to the [Light Table] menu.
• A [Show Only Center Line] mode switching command has been added to the [View] menu.
• A [Switch Drawing Mode] command has been added to the [Cel] menu.
• The [Cel] menu [Create Shadow Markup] command has been changed to the [Shadow Markup Creation] and [Shadow Markup Creation Setting] commands.
• In the [Pen], [Line], and [Curve] tools, pressing the F1 key now switches to [Stroke-in] and pressing the F2 key switches to [Stroke-out].
• It is now possible to set the thickness of the [Pen], [Line], [Polyline] and [Shape] tools to 2 decimal places.
• When using the [Line] and [Curve] tools, the display before and after determination has been made the same.
• When using the [Line] and [Curve] tools, the tools will switch to the join line tool while the Alt key is being pressed.
• When using the [Fill] tool, pressing the F1 key will now switch to the [Close Gap] option.
• A [Snap] option has been added to [Zoom In With Drag] in the [Zoom] tool.
• A [Show Guide] option has been added to the [Light Table] tool.
• It is now possible to create an X-sheet at the same time when creating a new scene folder.
• It is now possible to confirm the specified drawing paper margin when creating a new scene folder.
• When creating a new scene folder, it is now only possible to change the size when the drawing paper is set to custom drawing paper.
• A [Combine White Background] option has been added to the image save and export dialog boxes.
• A [Set Selection as White Transparent on Paste] option has been added to [Cel] in the [Preferences] dialog box.
• When exporting a scene folder, the CoreRETAS X-sheet standard resolution will be taken from the scene folder settings.
• When the image being edited is an image in the scene folder, the order of images when moving using the [Previous Cel] and [Next Cel] commands is now the same as that shown in the scene folder.
• For layers and planes, [Integration of Same Types] of items can now be carried out.
• When pressing keys 1-8, it is now possible to switch planes in drawing mode and switch the painting color in shadow markup mode.
• The view mode when vector images have been loaded to the light table now follows [Show Antialias] in the [Show] menu.
• When carrying out simple position adjustment using the [Set Position] dialog box, the position now conforms with the anchor frame.
• The light table view is now not refreshed while numerical values for [Angle], [Scale], and [Resolution] are being changed using the [Set Position] dialog box.
• The semi-transparent parts of thumbnails are now shown faintly.
• The [Raster General Layer] has been moved to the bottom of the layer selection list of each dialog box.
• Image loading and display has been speeded up.
• The light table display has been speeded up.
• When an image is exported as raster after editing as a vector, the image quality has been improved.
• When the display size is set to small, the image quality while executing motion check has been improved.
• For cels being edited, the margins can now be changed.
• [Change Margin] has been added to the batch items.
• The motion check can now be exported in movie format.
• An [Undo/Redo] command has been added to the [Edit] menu.
• In the [Image Previewer] of the [File Browser] window, when creating cels the dialog box now allows specification of the number of cels.
• A [Scroll to Outside of Image] option has been added to [Cel] in the [Preferences] dialog box.
• A [Create Boundary Line] option has been added to [Shadow Markup Layer] in the [New Layer] dialog box.
• When using the [Fill] tool in the [Shadow Markup Layer], clicking on a location that has the same color as the foreground color will make it transparent.
• [Smooth Vector Line] has been added to the options of the [Join Line Tool].
• In the [Edit] menu, the [Undo] command has been changed to [Return 1 Step], and the [Redo] command has been changed to [Proceed 1 Step].
• In the X-sheet, even if an inbetweening mark comes before the first cel number, when the [Transfer Inbetweening Numbers] command is executed, the inbetweening marks will now be transferred.
• In the drawing layer, when pasting into a plane of a different color, the color of the floating view is now matched with the color of the destination plane.
• When exporting a raster mono traced cel using [Export For Painting], in the case where the thin lines create a gap, the lines are now joined.
• When creating a cel using the [Image Previewer] in the [File Browser] window, if there is not enough space in the cel bank, the space is now increased.
• While moving the light table using the [Move Light Table] tool, the image is now displayed.
• A [Make Overlapping Image Transparent] option has been added to the [Light Table Setting] dialog box.
• The [Make Image High Quality During Rotation] option in the [Light Table Setting] dialog box has been changed to [Make Image High Quality During Zoom In, Zoom Out and Rotation].
• The operation of displaying the light table images using Alt + 1 to 9 has been improved.
• When opening the [Cel] window, [Default] is set in the [Light Table] palette.
• The lower limit of the [Gap] parameter in the [Fill] tool, [Magic Wand] tool, [Join Line] tool, [Shadow Markup Layer Creation] command, and [Export for Painting] command has been changed from 0 pixels to 1 pixel (when mm is specified, the change is from 0.0 to 0.1mm).
• When opening the X-sheet, in the save dialog box [X-sheet] has been changed to [Drawing X-sheet] and [CoreRETAS X-sheet] has been changed to [Shooting X-sheet].
■Bug Fixes
• The bug in which the application was forcibly quit when pressing the ESC key to cancel while loading TGA and PND files has been fixed.
• The bug in which the application was forcibly quit by pressing the Ctrl key during start-up when the [Fill] tool was the current tool has been fixed.
• The bug of the slower playback than the specified FPS when executing motion check has been fixed.
• The bug in which the drawing layer image was cleared when changing the [Closest to Maximum Frame] using the [Drawing Paper Settings] has been fixed.
• The bug where the resolution of the light table image was not correctly displayed when the resolution of the light table image and the edited image was different has been fixed.
• The bug in which the [Increase Width of Lines Less than 1 Pixel Wide] option in Preferences setting did not operate when exporting raster mono finished drawings has been fixed.
• The bug in which the line thickness changed when joining 2 lines of different thicknesses using the [Join Line] tool has been fixed.
• The bug in which the anchor frame created a 0*0 scene folder when the drawing paper unit was set to pixels using [Drawing Paper] in [Preferences] has been fixed.
• The bug where rotation to the correct direction when carrying out rotation distortion while the cel was shown inversed has been fixed.
• The bug in which the anchor frame position was displaced when viewing an image moved from the [Frame] layer in the light table has been fixed.
• The bug in which the semi-transparent parts of light table images were not correctly shown has been fixed.
• The bug that sometimes caused unstable operation after executing the [Paste to Selected Plane] command for the vector plane has been fixed.
• The bug where the [Layer] palette scroll bar was sometimes not correctly refreshed has been fixed.
• The bug that prevented the input of a number immediately before an inbetweening mark after an inbetweening mark in the X-sheet has been fixed.
• The bug that prevented correct operation of the light table simple position adjustment when the anchor frame cel size was changed to an empty value has been fixed.
• The bug when using the Ctrl or Shift keys in the [Light Table] palette where an incorrect selection condition could be set has been fixed.
• The bug in which operation was sometimes not correct for pen snap and line joining in the [Vector Drawing Layer] has been fixed.
• The problem of the incorrect ruler mouse position when the [Cel] window tool bar was being displayed has been fixed.
• The bug in which the X direction ruler did not operate correctly after switching between showing/hiding the [Cel] window tool bar has been fixed.
• The bug in which the [Cel] window [Zoom Out] button could be pressed but did not operate has been fixed.
• The bug in which the red border of the Light Table was not displayed when the [Light Table Move] tool was selected while the [Cel] window was open has been fixed.
• The bug in which correct transfer could not be realized when executing the [Transfer Inbetween Numbers] command when different cel numbers were input for each 1 frame of the X-sheet has been fixed.
• The bug in which correct transfer could not be realized when executing the [Transfer Inbetween Numbers] command when a value of 1024 or larger was input as the cel number in the X-sheet has been fixed.
• The bug of not being able to input 0 as an X-sheet inbetween number has been fixed.
• The bug where the cel number did not change even when a value was input into the X-sheet has been fixed.
• The bug in which input could not be carried out for all frames when several frames were selected and an empty cel was input in the X-sheet has been fixed.
• The bug where the application was forcibly quit by moving an image other than a [Gray Trace] image to a [Gray Trace] image in the [File Previewer] palette has been fixed.
• The bug in which the minimum width of the [Layer] palette was not the same as the minimum width of the [Light Table] palette has been fixed.
• The bug when the OS was Windows 2000 in which the characters are not shown on the status bar of the [Light Table] palette has been fixed.
• The bug where the colors became strange when a cel with a revised layer was saved in a general image format such as TGA has been fixed.
• The bug in which there was displacement in the position of a [Vector Image Layer] of an [Additional Line Plane] line when exporting a raster image has been fixed.
• The bug where the selected condition of a vector was released when executing the [Return 1 Step] after deleting a vector line has been fixed.
• The bug in which the loading of a vanishing point file could not be carried out when creating a [Vanishing Point Layer] has been fixed.
• The bug in which semi-transparent pixels were rendered as opaque during motion check execution has been fixed.
• The bug where the movement of the mouse cursor immediately after clicking the mouse caused the cursor to be dragged momentarily has been fixed.
• The bug that caused rotation of the view image when the [Light Table] view position was moved has been fixed.
• The bug that prevented correct previewing when the image resolution was switched to numerical setting in the [Light Table View Setting] dialog box has been fixed.
• The bug that caused a position displacement when finishing rotation after mirroring the [Light Table] in the situation where the [Light Table] and [Cel] were shown inversed has been fixed.
• The bug in which there was a displacement of the box line coloring end when exporting a layer that moved a vector layer as a finished vector drawing has been fixed.
• The bug in which the settings were not reflected when moving selected regions using key operations immediately after switching the [Move Image] check box of the [Rectangle Selection] tool, [Lasso] tool, [Magic Wand Selection] tool and [Selection Brush] tool has been fixed.
• The bug in which the selected range began to flash when pressing the [Alt/Option] keys to switch to [Polyline] while [Lasso] was selected in the [Lasso] tool has been fixed.
• The bug where the hand tool was switched to when pressing the [Ctrl/Command] keys during operations using the [Polyline] tool has been fixed.
• The bug in which pressing the [Alt/Option] key did not change to [Lasso] when starting to select a range while pressing the [Alt/Option] keys in the [Lasso] Tool [Polyline] has been fixed.
• The bug where processing became impossible in a situation where there were many lines pointing in the same direction piled on top of each other using the [Polyline] tool has been fixed.
• The bug that made it sometimes not possible to finish when using the [Polyline] tool to finish on the same point as the starting point has been fixed.
• The bug in which part of a shape sometimes remained on the screen when executing the [Undo] comment after drawing an acute angled shape using the [Shape] tool has been fixed.
• The bug in which the folder name was not refreshed even when the [Auto Create] check box was On while selecting the work name from the history using the drawing scene folder has been fixed.
■File Plug-in Function Adding and Changing Points
• A 16-bit Save option has been added to the [PNG] file plug-in.
• The [RAW] file plug-in is now capable of saving 16-bit images.
■File Plug-in Problem Correction Points
• The bug where transparent parts became white when reading SVD files has been fixed.
• The bug in which images were inversed when loading 8-bit grayscale PNG has been fixed.
• The bug in which thumbnails were black when loading 8-bit grayscale PNG has been fixed.
• The problem where the colors were strange when saving in non-compressed SGI format has been fixed.
|
